Guidelines for Applicators: CHECKLIST

Start the season right by following this PROCOTE checklist.

• Bring Procote to the ideal temperature of 20°C.
• Entire tote must be brought to temperature before agitation and use.
• Check temperature.
• Agitate for 5 - 10 minutes.
• Check temperature again.
• Agitate Procote to create a homogeneous mixture. The visible oil line of separation should disappear, and the thick layer at the bottom should be blended into a consistent mixture before use.
• Test that the pump turns on freely by bumping into manual mode.
• Ensure the scales turn on and are registering accurately.
• Run a check on the heat tape to ensure lins flow properly with product.
• Check the output hose leading to the blender and spray bar. Ensure it is fully open by using air to clean any foreign debris.
• If using Procote in an automated blending system, refer to the blender and automation manuals to properly prime the system.